Viewing file:  atariints.h (5.67 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
** atariints.h -- Atari Linux interrupt handling structs and prototypes
**
** Copyright 1994 by Björn Brauel
**
** 5/2/94 Roman Hodek:
** TT interrupt definitions added.
**
** 12/02/96: (Roman)
** Adapted to new int handling scheme (see ataints.c); revised numbering
**
** This file is subject to the terms and conditions of the GNU General Public
** License. See the file COPYING in the main directory of this archive
** for more details.
**
*/
#ifndef _LINUX_ATARIINTS_H_
#define _LINUX_ATARIINTS_H_
#include <asm/irq.h>
#include <asm/atarihw.h>
/*
** Atari Interrupt sources.
**
*/
#define STMFP_SOURCE_BASE 8
#define TTMFP_SOURCE_BASE 24
#define SCC_SOURCE_BASE 40
#define VME_SOURCE_BASE 56
#define VME_MAX_SOURCES 16
#define NUM_ATARI_SOURCES 141
/* convert vector number to int source number */
#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
/* convert irq_handler index to vector number */
#define IRQ_SOURCE_TO_VECTOR(i) ((i) + ((i) < 8 ? 0x18 : (0x40-8)))
/* interrupt service types */
#define IRQ_TYPE_SLOW 0
#define IRQ_TYPE_FAST 1
#define IRQ_TYPE_PRIO 2
/* ST-MFP interrupts */
#define IRQ_MFP_BUSY (8)
#define IRQ_MFP_DCD (9)
#define IRQ_MFP_CTS (10)
#define IRQ_MFP_GPU (11)
#define IRQ_MFP_TIMD (12)
#define IRQ_MFP_TIMC (13)
#define IRQ_MFP_ACIA (14)
#define IRQ_MFP_FDC (15)
#define IRQ_MFP_ACSI IRQ_MFP_FDC
#define IRQ_MFP_FSCSI IRQ_MFP_FDC
#define IRQ_MFP_IDE IRQ_MFP_FDC
#define IRQ_MFP_TIMB (16)
#define IRQ_MFP_SERERR (17)
#define IRQ_MFP_SEREMPT (18)
#define IRQ_MFP_RECERR (19)
#define IRQ_MFP_RECFULL (20)
#define IRQ_MFP_TIMA (21)
#define IRQ_MFP_RI (22)
#define IRQ_MFP_MMD (23)
/* TT-MFP interrupts */
#define IRQ_TT_MFP_IO0 (24)
#define IRQ_TT_MFP_IO1 (25)
#define IRQ_TT_MFP_SCC (26)
#define IRQ_TT_MFP_RI (27)
#define IRQ_TT_MFP_TIMD (28)
#define IRQ_TT_MFP_TIMC (29)
#define IRQ_TT_MFP_DRVRDY (30)
#define IRQ_TT_MFP_SCSIDMA (31)
#define IRQ_TT_MFP_TIMB (32)
#define IRQ_TT_MFP_SERERR (33)
#define IRQ_TT_MFP_SEREMPT (34)
#define IRQ_TT_MFP_RECERR (35)
#define IRQ_TT_MFP_RECFULL (36)
#define IRQ_TT_MFP_TIMA (37)
#define IRQ_TT_MFP_RTC (38)
#define IRQ_TT_MFP_SCSI (39)
/* SCC interrupts */
#define IRQ_SCCB_TX (40)
#define IRQ_SCCB_STAT (42)
#define IRQ_SCCB_RX (44)
#define IRQ_SCCB_SPCOND (46)
#define IRQ_SCCA_TX (48)
#define IRQ_SCCA_STAT (50)
#define IRQ_SCCA_RX (52)
#define IRQ_SCCA_SPCOND (54)
/* shared MFP timer D interrupts - hires timer for EtherNEC et al. */
#define IRQ_MFP_TIMER1 (64)
#define IRQ_MFP_TIMER2 (65)
#define IRQ_MFP_TIMER3 (66)
#define IRQ_MFP_TIMER4 (67)
#define IRQ_MFP_TIMER5 (68)
#define IRQ_MFP_TIMER6 (69)
#define IRQ_MFP_TIMER7 (70)
#define IRQ_MFP_TIMER8 (71)
#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */
#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */
#define MFP_ENABLE 0
#define MFP_PENDING 1
#define MFP_SERVICE 2
#define MFP_MASK 3
/* Utility functions for setting/clearing bits in the interrupt registers of
* the MFP. 'type' should be constant, if 'irq' is constant, too, code size is
* reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */
static inline int get_mfp_bit( unsigned irq, int type )
{ unsigned char mask, *reg;
mask = 1 << (irq & 7);
reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
return( *reg & mask );
}
static inline void set_mfp_bit( unsigned irq, int type )
{ unsigned char mask, *reg;
mask = 1 << (irq & 7);
reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
__asm__ __volatile__ ( "orb %0,%1"
: : "di" (mask), "m" (*reg) : "memory" );
}
static inline void clear_mfp_bit( unsigned irq, int type )
{ unsigned char mask, *reg;
mask = ~(1 << (irq & 7));
reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
if (type == MFP_PENDING || type == MFP_SERVICE)
__asm__ __volatile__ ( "moveb %0,%1"
: : "di" (mask), "m" (*reg) : "memory" );
else
__asm__ __volatile__ ( "andb %0,%1"
: : "di" (mask), "m" (*reg) : "memory" );
}
/*
* {en,dis}able_irq have the usual semantics of temporary blocking the
* interrupt, but not losing requests that happen between disabling and
* enabling. This is done with the MFP mask registers.
*/
static inline void atari_enable_irq( unsigned irq )
{
if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
set_mfp_bit( irq, MFP_MASK );
}
static inline void atari_disable_irq( unsigned irq )
{
if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
clear_mfp_bit( irq, MFP_MASK );
}
/*
* In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not
* "stored"
*/
static inline void atari_turnon_irq( unsigned irq )
{
if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
set_mfp_bit( irq, MFP_ENABLE );
}
static inline void atari_turnoff_irq( unsigned irq )
{
if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
clear_mfp_bit( irq, MFP_ENABLE );
clear_mfp_bit( irq, MFP_PENDING );
}
static inline void atari_clear_pending_irq( unsigned irq )
{
if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
clear_mfp_bit( irq, MFP_PENDING );
}
static inline int atari_irq_pending( unsigned irq )
{
if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 );
return( get_mfp_bit( irq, MFP_PENDING ) );
}
unsigned int atari_register_vme_int(void);
void atari_unregister_vme_int(unsigned int);
#endif /* linux/atariints.h */
|