| Viewing file:  sun3xflop.h (5.59 KB)      -rw-r--r-- Select action/file-type:
 
  (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) | 
 
/* sun3xflop.h: Sun3/80 specific parts of the floppy driver.*
 * Derived partially from asm-sparc/floppy.h, which is:
 *     Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
 *
 * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net)
 */
 
 #ifndef __ASM_SUN3X_FLOPPY_H
 #define __ASM_SUN3X_FLOPPY_H
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/sun3x.h>
 
 /* default interrupt vector */
 #define SUN3X_FDC_IRQ 0x40
 
 /* some constants */
 #define FCR_TC 0x1
 #define FCR_EJECT 0x2
 #define FCR_MTRON 0x4
 #define FCR_DSEL1 0x8
 #define FCR_DSEL0 0x10
 
 /* We don't need no stinkin' I/O port allocation crap. */
 #undef release_region
 #undef request_region
 #define release_region(X, Y)    do { } while(0)
 #define request_region(X, Y, Z)    (1)
 
 struct sun3xflop_private {
 volatile unsigned char *status_r;
 volatile unsigned char *data_r;
 volatile unsigned char *fcr_r;
 volatile unsigned char *fvr_r;
 unsigned char fcr;
 } sun3x_fdc;
 
 /* Super paranoid... */
 #undef HAVE_DISABLE_HLT
 
 /* Routines unique to each controller type on a Sun. */
 static unsigned char sun3x_82072_fd_inb(int port)
 {
 static int once = 0;
 //    udelay(5);
 switch(port & 7) {
 default:
 printk("floppy: Asked to read unknown port %d\n", port);
 panic("floppy: Port bolixed.");
 case 4: /* FD_STATUS */
 return (*sun3x_fdc.status_r) & ~STATUS_DMA;
 case 5: /* FD_DATA */
 return (*sun3x_fdc.data_r);
 case 7: /* FD_DIR */
 /* ugly hack, I can't find a way to actually detect the disk */
 if(!once) {
 once = 1;
 return 0x80;
 }
 return 0;
 };
 panic("sun_82072_fd_inb: How did I get here?");
 }
 
 static void sun3x_82072_fd_outb(unsigned char value, int port)
 {
 //    udelay(5);
 switch(port & 7) {
 default:
 printk("floppy: Asked to write to unknown port %d\n", port);
 panic("floppy: Port bolixed.");
 case 2: /* FD_DOR */
 /* Oh geese, 82072 on the Sun has no DOR register,
 * so we make do with taunting the FCR.
 *
 * ASSUMPTIONS:  There will only ever be one floppy
 *               drive attached to a Sun controller
 *               and it will be at drive zero.
 */
 
 {
 unsigned char fcr = sun3x_fdc.fcr;
 
 if(value & 0x10) {
 fcr |= (FCR_DSEL0 | FCR_MTRON);
 } else
 fcr &= ~(FCR_DSEL0 | FCR_MTRON);
 
 
 if(fcr != sun3x_fdc.fcr) {
 *(sun3x_fdc.fcr_r) = fcr;
 sun3x_fdc.fcr = fcr;
 }
 }
 break;
 case 5: /* FD_DATA */
 *(sun3x_fdc.data_r) = value;
 break;
 case 7: /* FD_DCR */
 *(sun3x_fdc.status_r) = value;
 break;
 case 4: /* FD_STATUS */
 *(sun3x_fdc.status_r) = value;
 break;
 };
 return;
 }
 
 
 asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id)
 {
 register unsigned char st;
 
 #undef TRACE_FLPY_INT
 #define NO_FLOPPY_ASSEMBLER
 
 #ifdef TRACE_FLPY_INT
 static int calls=0;
 static int bytes=0;
 static int dma_wait=0;
 #endif
 if(!doing_pdma) {
 floppy_interrupt(irq, dev_id);
 return IRQ_HANDLED;
 }
 
 //    printk("doing pdma\n");// st %x\n", sun_fdc->status_82072);
 
 #ifdef TRACE_FLPY_INT
 if(!calls)
 bytes = virtual_dma_count;
 #endif
 
 {
 register int lcount;
 register char *lptr;
 
 for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
 lcount; lcount--, lptr++) {
 /*            st=fd_inb(virtual_dma_port+4) & 0x80 ;  */
 st = *(sun3x_fdc.status_r);
 /*            if(st != 0xa0)                  */
 /*                break;                  */
 
 if((st & 0x80) == 0) {
 virtual_dma_count = lcount;
 virtual_dma_addr = lptr;
 return IRQ_HANDLED;
 }
 
 if((st & 0x20) == 0)
 break;
 
 if(virtual_dma_mode)
 /*                fd_outb(*lptr, virtual_dma_port+5); */
 *(sun3x_fdc.data_r) = *lptr;
 else
 /*                *lptr = fd_inb(virtual_dma_port+5); */
 *lptr = *(sun3x_fdc.data_r);
 }
 
 virtual_dma_count = lcount;
 virtual_dma_addr = lptr;
 /*        st = fd_inb(virtual_dma_port+4);   */
 st = *(sun3x_fdc.status_r);
 }
 
 #ifdef TRACE_FLPY_INT
 calls++;
 #endif
 //    printk("st=%02x\n", st);
 if(st == 0x20)
 return IRQ_HANDLED;
 if(!(st & 0x20)) {
 virtual_dma_residue += virtual_dma_count;
 virtual_dma_count=0;
 doing_pdma = 0;
 
 #ifdef TRACE_FLPY_INT
 printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n",
 virtual_dma_count, virtual_dma_residue, calls, bytes,
 dma_wait);
 calls = 0;
 dma_wait=0;
 #endif
 
 floppy_interrupt(irq, dev_id);
 return IRQ_HANDLED;
 }
 
 
 #ifdef TRACE_FLPY_INT
 if(!virtual_dma_count)
 dma_wait++;
 #endif
 return IRQ_HANDLED;
 }
 
 static int sun3xflop_request_irq(void)
 {
 static int once = 0;
 int error;
 
 if(!once) {
 once = 1;
 error = request_irq(FLOPPY_IRQ, sun3xflop_hardint,
 0, "floppy", NULL);
 return ((error == 0) ? 0 : -1);
 } else return 0;
 }
 
 static void __init floppy_set_flags(int *ints,int param, int param2);
 
 static int sun3xflop_init(void)
 {
 if(FLOPPY_IRQ < 0x40)
 FLOPPY_IRQ = SUN3X_FDC_IRQ;
 
 sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC;
 sun3x_fdc.data_r  = (volatile unsigned char *)(SUN3X_FDC+1);
 sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR;
 sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR;
 sun3x_fdc.fcr = 0;
 
 /* Last minute sanity check... */
 if(*sun3x_fdc.status_r == 0xff) {
 return -1;
 }
 
 *sun3x_fdc.fvr_r = FLOPPY_IRQ;
 
 *sun3x_fdc.fcr_r = FCR_TC;
 udelay(10);
 *sun3x_fdc.fcr_r = 0;
 
 /* Success... */
 floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this.
 allowed_drive_mask = 0x01;
 return (int) SUN3X_FDC;
 }
 
 /* I'm not precisely sure this eject routine works */
 static int sun3x_eject(void)
 {
 if(MACH_IS_SUN3X) {
 
 sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT);
 *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
 udelay(10);
 sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT);
 *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
 }
 
 return 0;
 }
 
 #define fd_eject(drive) sun3x_eject()
 
 #endif /* !(__ASM_SUN3X_FLOPPY_H) */
 
 |