| Viewing file:  io.h (12.26 KB)      -rw-r--r-- Select action/file-type:
 
  (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) | 
 
/** Copyright 2010 Tilera Corporation. All Rights Reserved.
 *
 *   This program is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU General Public License
 *   as published by the Free Software Foundation, version 2.
 *
 *   This program is distributed in the hope that it will be useful, but
 *   WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 *   NON INFRINGEMENT.  See the GNU General Public License for
 *   more details.
 */
 
 #ifndef _ASM_TILE_IO_H
 #define _ASM_TILE_IO_H
 
 #include <linux/kernel.h>
 #include <linux/bug.h>
 #include <asm/page.h>
 
 /* Maximum PCI I/O space address supported. */
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
 * Convert a physical pointer to a virtual kernel pointer for /dev/mem
 * access.
 */
 #define xlate_dev_mem_ptr(p)    __va(p)
 
 /*
 * Convert a virtual cached pointer to an uncached pointer.
 */
 #define xlate_dev_kmem_ptr(p)    p
 
 /*
 * Change "struct page" to physical address.
 */
 #define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
 
 /*
 * Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to
 * long before casting it to a pointer to avoid compiler warnings.
 */
 #if CHIP_HAS_MMIO()
 extern void __iomem *ioremap(resource_size_t offset, unsigned long size);
 extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
 pgprot_t pgprot);
 extern void iounmap(volatile void __iomem *addr);
 #else
 #define ioremap(physaddr, size)    ((void __iomem *)(unsigned long)(physaddr))
 #define iounmap(addr)        ((void)0)
 #endif
 
 #define ioremap_nocache(physaddr, size)        ioremap(physaddr, size)
 #define ioremap_wc(physaddr, size)        ioremap(physaddr, size)
 #define ioremap_writethrough(physaddr, size)    ioremap(physaddr, size)
 #define ioremap_fullcache(physaddr, size)    ioremap(physaddr, size)
 
 #define mmiowb()
 
 /* Conversion between virtual and physical mappings.  */
 #define mm_ptov(addr)        ((void *)phys_to_virt(addr))
 #define mm_vtop(addr)        ((unsigned long)virt_to_phys(addr))
 
 #if CHIP_HAS_MMIO()
 
 /*
 * We use inline assembly to guarantee that the compiler does not
 * split an access into multiple byte-sized accesses as it might
 * sometimes do if a register data structure is marked "packed".
 * Obviously on tile we can't tolerate such an access being
 * actually unaligned, but we want to avoid the case where the
 * compiler conservatively would generate multiple accesses even
 * for an aligned read or write.
 */
 
 static inline u8 __raw_readb(const volatile void __iomem *addr)
 {
 return *(const volatile u8 __force *)addr;
 }
 
 static inline u16 __raw_readw(const volatile void __iomem *addr)
 {
 u16 ret;
 asm volatile("ld2u %0, %1" : "=r" (ret) : "r" (addr));
 barrier();
 return le16_to_cpu(ret);
 }
 
 static inline u32 __raw_readl(const volatile void __iomem *addr)
 {
 u32 ret;
 /* Sign-extend to conform to u32 ABI sign-extension convention. */
 asm volatile("ld4s %0, %1" : "=r" (ret) : "r" (addr));
 barrier();
 return le32_to_cpu(ret);
 }
 
 static inline u64 __raw_readq(const volatile void __iomem *addr)
 {
 u64 ret;
 asm volatile("ld %0, %1" : "=r" (ret) : "r" (addr));
 barrier();
 return le64_to_cpu(ret);
 }
 
 static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
 {
 *(volatile u8 __force *)addr = val;
 }
 
 static inline void __raw_writew(u16 val, volatile void __iomem *addr)
 {
 asm volatile("st2 %0, %1" :: "r" (addr), "r" (cpu_to_le16(val)));
 }
 
 static inline void __raw_writel(u32 val, volatile void __iomem *addr)
 {
 asm volatile("st4 %0, %1" :: "r" (addr), "r" (cpu_to_le32(val)));
 }
 
 static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
 {
 asm volatile("st %0, %1" :: "r" (addr), "r" (cpu_to_le64(val)));
 }
 
 /*
 * The on-chip I/O hardware on tilegx is configured with VA=PA for the
 * kernel's PA range.  The low-level APIs and field names use "va" and
 * "void *" nomenclature, to be consistent with the general notion
 * that the addresses in question are virtualizable, but in the kernel
 * context we are actually manipulating PA values.  (In other contexts,
 * e.g. access from user space, we do in fact use real virtual addresses
 * in the va fields.)  To allow readers of the code to understand what's
 * happening, we direct their attention to this comment by using the
 * following two functions that just duplicate __va() and __pa().
 */
 typedef unsigned long tile_io_addr_t;
 static inline tile_io_addr_t va_to_tile_io_addr(void *va)
 {
 BUILD_BUG_ON(sizeof(phys_addr_t) != sizeof(tile_io_addr_t));
 return __pa(va);
 }
 static inline void *tile_io_addr_to_va(tile_io_addr_t tile_io_addr)
 {
 return __va(tile_io_addr);
 }
 
 #else /* CHIP_HAS_MMIO() */
 
 #ifdef CONFIG_PCI
 
 extern u8 _tile_readb(unsigned long addr);
 extern u16 _tile_readw(unsigned long addr);
 extern u32 _tile_readl(unsigned long addr);
 extern u64 _tile_readq(unsigned long addr);
 extern void _tile_writeb(u8  val, unsigned long addr);
 extern void _tile_writew(u16 val, unsigned long addr);
 extern void _tile_writel(u32 val, unsigned long addr);
 extern void _tile_writeq(u64 val, unsigned long addr);
 
 #define __raw_readb(addr) _tile_readb((unsigned long)addr)
 #define __raw_readw(addr) _tile_readw((unsigned long)addr)
 #define __raw_readl(addr) _tile_readl((unsigned long)addr)
 #define __raw_readq(addr) _tile_readq((unsigned long)addr)
 #define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)addr)
 #define __raw_writew(val, addr) _tile_writew(val, (unsigned long)addr)
 #define __raw_writel(val, addr) _tile_writel(val, (unsigned long)addr)
 #define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)addr)
 
 #else /* CONFIG_PCI */
 
 /*
 * The tilepro architecture does not support IOMEM unless PCI is enabled.
 * Unfortunately we can't yet simply not declare these methods,
 * since some generic code that compiles into the kernel, but
 * we never run, uses them unconditionally.
 */
 
 static inline int iomem_panic(void)
 {
 panic("readb/writeb and friends do not exist on tile without PCI");
 return 0;
 }
 
 static inline u8 readb(unsigned long addr)
 {
 return iomem_panic();
 }
 
 static inline u16 _readw(unsigned long addr)
 {
 return iomem_panic();
 }
 
 static inline u32 readl(unsigned long addr)
 {
 return iomem_panic();
 }
 
 static inline u64 readq(unsigned long addr)
 {
 return iomem_panic();
 }
 
 static inline void writeb(u8  val, unsigned long addr)
 {
 iomem_panic();
 }
 
 static inline void writew(u16 val, unsigned long addr)
 {
 iomem_panic();
 }
 
 static inline void writel(u32 val, unsigned long addr)
 {
 iomem_panic();
 }
 
 static inline void writeq(u64 val, unsigned long addr)
 {
 iomem_panic();
 }
 
 #endif /* CONFIG_PCI */
 
 #endif /* CHIP_HAS_MMIO() */
 
 #define readb __raw_readb
 #define readw __raw_readw
 #define readl __raw_readl
 #define readq __raw_readq
 #define writeb __raw_writeb
 #define writew __raw_writew
 #define writel __raw_writel
 #define writeq __raw_writeq
 
 #define readb_relaxed readb
 #define readw_relaxed readw
 #define readl_relaxed readl
 #define readq_relaxed readq
 
 #define ioread8 readb
 #define ioread16 readw
 #define ioread32 readl
 #define ioread64 readq
 #define iowrite8 writeb
 #define iowrite16 writew
 #define iowrite32 writel
 #define iowrite64 writeq
 
 #if CHIP_HAS_MMIO() || defined(CONFIG_PCI)
 
 static inline void memset_io(volatile void *dst, int val, size_t len)
 {
 size_t x;
 BUG_ON((unsigned long)dst & 0x3);
 val = (val & 0xff) * 0x01010101;
 for (x = 0; x < len; x += 4)
 writel(val, dst + x);
 }
 
 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
 size_t len)
 {
 size_t x;
 BUG_ON((unsigned long)src & 0x3);
 for (x = 0; x < len; x += 4)
 *(u32 *)(dst + x) = readl(src + x);
 }
 
 static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
 size_t len)
 {
 size_t x;
 BUG_ON((unsigned long)dst & 0x3);
 for (x = 0; x < len; x += 4)
 writel(*(u32 *)(src + x), dst + x);
 }
 
 #endif
 
 #if CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO)
 
 static inline u8 inb(unsigned long addr)
 {
 return readb((volatile void __iomem *) addr);
 }
 
 static inline u16 inw(unsigned long addr)
 {
 return readw((volatile void __iomem *) addr);
 }
 
 static inline u32 inl(unsigned long addr)
 {
 return readl((volatile void __iomem *) addr);
 }
 
 static inline void outb(u8 b, unsigned long addr)
 {
 writeb(b, (volatile void __iomem *) addr);
 }
 
 static inline void outw(u16 b, unsigned long addr)
 {
 writew(b, (volatile void __iomem *) addr);
 }
 
 static inline void outl(u32 b, unsigned long addr)
 {
 writel(b, (volatile void __iomem *) addr);
 }
 
 static inline void insb(unsigned long addr, void *buffer, int count)
 {
 if (count) {
 u8 *buf = buffer;
 do {
 u8 x = inb(addr);
 *buf++ = x;
 } while (--count);
 }
 }
 
 static inline void insw(unsigned long addr, void *buffer, int count)
 {
 if (count) {
 u16 *buf = buffer;
 do {
 u16 x = inw(addr);
 *buf++ = x;
 } while (--count);
 }
 }
 
 static inline void insl(unsigned long addr, void *buffer, int count)
 {
 if (count) {
 u32 *buf = buffer;
 do {
 u32 x = inl(addr);
 *buf++ = x;
 } while (--count);
 }
 }
 
 static inline void outsb(unsigned long addr, const void *buffer, int count)
 {
 if (count) {
 const u8 *buf = buffer;
 do {
 outb(*buf++, addr);
 } while (--count);
 }
 }
 
 static inline void outsw(unsigned long addr, const void *buffer, int count)
 {
 if (count) {
 const u16 *buf = buffer;
 do {
 outw(*buf++, addr);
 } while (--count);
 }
 }
 
 static inline void outsl(unsigned long addr, const void *buffer, int count)
 {
 if (count) {
 const u32 *buf = buffer;
 do {
 outl(*buf++, addr);
 } while (--count);
 }
 }
 
 extern void __iomem *ioport_map(unsigned long port, unsigned int len);
 extern void ioport_unmap(void __iomem *addr);
 
 #else
 
 /*
 * The TilePro architecture does not support IOPORT, even with PCI.
 * Unfortunately we can't yet simply not declare these methods,
 * since some generic code that compiles into the kernel, but
 * we never run, uses them unconditionally.
 */
 
 static inline long ioport_panic(void)
 {
 #ifdef __tilegx__
 panic("PCI IO space support is disabled. Configure the kernel with"
 " CONFIG_TILE_PCI_IO to enable it");
 #else
 panic("inb/outb and friends do not exist on tile");
 #endif
 return 0;
 }
 
 static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
 {
 pr_info("ioport_map: mapping IO resources is unsupported on tile.\n");
 return NULL;
 }
 
 static inline void ioport_unmap(void __iomem *addr)
 {
 ioport_panic();
 }
 
 static inline u8 inb(unsigned long addr)
 {
 return ioport_panic();
 }
 
 static inline u16 inw(unsigned long addr)
 {
 return ioport_panic();
 }
 
 static inline u32 inl(unsigned long addr)
 {
 return ioport_panic();
 }
 
 static inline void outb(u8 b, unsigned long addr)
 {
 ioport_panic();
 }
 
 static inline void outw(u16 b, unsigned long addr)
 {
 ioport_panic();
 }
 
 static inline void outl(u32 b, unsigned long addr)
 {
 ioport_panic();
 }
 
 static inline void insb(unsigned long addr, void *buffer, int count)
 {
 ioport_panic();
 }
 
 static inline void insw(unsigned long addr, void *buffer, int count)
 {
 ioport_panic();
 }
 
 static inline void insl(unsigned long addr, void *buffer, int count)
 {
 ioport_panic();
 }
 
 static inline void outsb(unsigned long addr, const void *buffer, int count)
 {
 ioport_panic();
 }
 
 static inline void outsw(unsigned long addr, const void *buffer, int count)
 {
 ioport_panic();
 }
 
 static inline void outsl(unsigned long addr, const void *buffer, int count)
 {
 ioport_panic();
 }
 
 #endif /* CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) */
 
 #define inb_p(addr)    inb(addr)
 #define inw_p(addr)    inw(addr)
 #define inl_p(addr)    inl(addr)
 #define outb_p(x, addr)    outb((x), (addr))
 #define outw_p(x, addr)    outw((x), (addr))
 #define outl_p(x, addr)    outl((x), (addr))
 
 #define ioread16be(addr)    be16_to_cpu(ioread16(addr))
 #define ioread32be(addr)    be32_to_cpu(ioread32(addr))
 #define iowrite16be(v, addr)    iowrite16(be16_to_cpu(v), (addr))
 #define iowrite32be(v, addr)    iowrite32(be32_to_cpu(v), (addr))
 
 #define ioread8_rep(p, dst, count) \
 insb((unsigned long) (p), (dst), (count))
 #define ioread16_rep(p, dst, count) \
 insw((unsigned long) (p), (dst), (count))
 #define ioread32_rep(p, dst, count) \
 insl((unsigned long) (p), (dst), (count))
 
 #define iowrite8_rep(p, src, count) \
 outsb((unsigned long) (p), (src), (count))
 #define iowrite16_rep(p, src, count) \
 outsw((unsigned long) (p), (src), (count))
 #define iowrite32_rep(p, src, count) \
 outsl((unsigned long) (p), (src), (count))
 
 #define virt_to_bus     virt_to_phys
 #define bus_to_virt     phys_to_virt
 
 #endif /* _ASM_TILE_IO_H */
 
 |