Viewing file:  init.h (10.72 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
#ifndef _LINUX_INIT_H
#define _LINUX_INIT_H
#include <linux/compiler.h>
#include <linux/types.h>
/* These macros are used to mark some functions or
* initialized data (doesn't apply to uninitialized data)
* as `initialization' functions. The kernel can take this
* as hint that the function is used only during the initialization
* phase and free up used memory resources after
*
* Usage:
* For functions:
*
* You should add __init immediately before the function name, like:
*
* static void __init initme(int x, int y)
* {
* extern int z; z = x * y;
* }
*
* If the function has a prototype somewhere, you can also add
* __init between closing brace of the prototype and semicolon:
*
* extern int initialize_foobar_device(int, int, int) __init;
*
* For initialized data:
* You should insert __initdata or __initconst between the variable name
* and equal sign followed by value, e.g.:
*
* static int init_variable __initdata = 0;
* static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
*
* Don't forget to initialize data not at file scope, i.e. within a function,
* as gcc otherwise puts the data into the bss section and not into the init
* section.
*/
/* These are for everybody (although not all archs will actually
discard it in modules) */
#define __init __section(.init.text) __cold notrace
#define __initdata __section(.init.data)
#define __initconst __constsection(.init.rodata)
#define __exitdata __section(.exit.data)
#define __exit_call __used __section(.exitcall.exit)
/*
* Some architecture have tool chains which do not handle rodata attributes
* correctly. For those disable special sections for const, so that other
* architectures can annotate correctly.
*/
#ifdef CONFIG_BROKEN_RODATA
#define __constsection(x)
#else
#define __constsection(x) __section(x)
#endif
/*
* modpost check for section mismatches during the kernel build.
* A section mismatch happens when there are references from a
* code or data section to an init section (both code or data).
* The init sections are (for most archs) discarded by the kernel
* when early init has completed so all such references are potential bugs.
* For exit sections the same issue exists.
*
* The following markers are used for the cases where the reference to
* the *init / *exit section (code or data) is valid and will teach
* modpost not to issue a warning. Intended semantics is that a code or
* data tagged __ref* can reference code or data from init section without
* producing a warning (of course, no warning does not mean code is
* correct, so optimally document why the __ref is needed and why it's OK).
*
* The markers follow same syntax rules as __init / __initdata.
*/
#define __ref __section(.ref.text) noinline
#define __refdata __section(.ref.data)
#define __refconst __constsection(.ref.rodata)
/* compatibility defines */
#define __init_refok __ref
#define __initdata_refok __refdata
#define __exit_refok __ref
#ifdef MODULE
#define __exitused
#else
#define __exitused __used
#endif
#define __exit __section(.exit.text) __exitused __cold notrace
/* temporary, until all users are removed */
#define __cpuinit
#define __cpuinitdata
#define __cpuinitconst
#define __cpuexit
#define __cpuexitdata
#define __cpuexitconst
/* Used for MEMORY_HOTPLUG */
#define __meminit __section(.meminit.text) __cold notrace
#define __meminitdata __section(.meminit.data)
#define __meminitconst __constsection(.meminit.rodata)
#define __memexit __section(.memexit.text) __exitused __cold notrace
#define __memexitdata __section(.memexit.data)
#define __memexitconst __constsection(.memexit.rodata)
/* For assembly routines */
#define __HEAD .section ".head.text","ax"
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
#define __INITDATA .section ".init.data","aw",%progbits
#define __INITRODATA .section ".init.rodata","a",%progbits
#define __FINITDATA .previous
/* temporary, until all users are removed */
#define __CPUINIT
#define __MEMINIT .section ".meminit.text", "ax"
#define __MEMINITDATA .section ".meminit.data", "aw"
#define __MEMINITRODATA .section ".meminit.rodata", "a"
/* silence warnings when references are OK */
#define __REF .section ".ref.text", "ax"
#define __REFDATA .section ".ref.data", "aw"
#define __REFCONST .section ".ref.rodata", "a"
#ifndef __ASSEMBLY__
/*
* Used for initialization calls..
*/
typedef int (*initcall_t)(void);
typedef void (*exitcall_t)(void);
extern initcall_t __con_initcall_start[], __con_initcall_end[];
extern initcall_t __security_initcall_start[], __security_initcall_end[];
/* Used for contructor calls. */
typedef void (*ctor_fn_t)(void);
/* Defined in init/main.c */
extern int do_one_initcall(initcall_t fn);
extern char __initdata boot_command_line[];
extern char *saved_command_line;
extern unsigned int reset_devices;
/* used by init/main.c */
void setup_arch(char **);
void prepare_namespace(void);
void __init load_default_modules(void);
int __init init_rootfs(void);
extern void (*late_time_init)(void);
extern bool initcall_debug;
#endif
#ifndef MODULE
#ifndef __ASSEMBLY__
/* initcalls are now grouped by functionality into separate
* subsections. Ordering inside the subsections is determined
* by link order.
* For backwards compatibility, initcall() puts the call in
* the device init subsection.
*
* The `id' arg to __define_initcall() is needed so that multiple initcalls
* can point at the same handler without causing duplicate-symbol build errors.
*/
#define __define_initcall(fn, id) \
static initcall_t __initcall_##fn##id __used \
__attribute__((__section__(".initcall" #id ".init"))) = fn
/*
* Early initcalls run before initializing SMP.
*
* Only for built-in code, not modules.
*/
#define early_initcall(fn) __define_initcall(fn, early)
/*
* A "pure" initcall has no dependencies on anything else, and purely
* initializes variables that couldn't be statically initialized.
*
* This only exists for built-in code, not for modules.
* Keep main.c:initcall_level_names[] in sync.
*/
#define pure_initcall(fn) __define_initcall(fn, 0)
#define core_initcall(fn) __define_initcall(fn, 1)
#define core_initcall_sync(fn) __define_initcall(fn, 1s)
#define postcore_initcall(fn) __define_initcall(fn, 2)
#define postcore_initcall_sync(fn) __define_initcall(fn, 2s)
#define arch_initcall(fn) __define_initcall(fn, 3)
#define arch_initcall_sync(fn) __define_initcall(fn, 3s)
#define subsys_initcall(fn) __define_initcall(fn, 4)
#define subsys_initcall_sync(fn) __define_initcall(fn, 4s)
#define fs_initcall(fn) __define_initcall(fn, 5)
#define fs_initcall_sync(fn) __define_initcall(fn, 5s)
#define rootfs_initcall(fn) __define_initcall(fn, rootfs)
#define device_initcall(fn) __define_initcall(fn, 6)
#define device_initcall_sync(fn) __define_initcall(fn, 6s)
#define late_initcall(fn) __define_initcall(fn, 7)
#define late_initcall_sync(fn) __define_initcall(fn, 7s)
#define __initcall(fn) device_initcall(fn)
#define __exitcall(fn) \
static exitcall_t __exitcall_##fn __exit_call = fn
#define console_initcall(fn) \
static initcall_t __initcall_##fn \
__used __section(.con_initcall.init) = fn
#define security_initcall(fn) \
static initcall_t __initcall_##fn \
__used __section(.security_initcall.init) = fn
struct obs_kernel_param {
const char *str;
int (*setup_func)(char *);
int early;
};
/*
* Only for really core code. See moduleparam.h for the normal way.
*
* Force the alignment so the compiler doesn't space elements of the
* obs_kernel_param "array" too far apart in .init.setup.
*/
#define __setup_param(str, unique_id, fn, early) \
static const char __setup_str_##unique_id[] __initconst \
__aligned(1) = str; \
static struct obs_kernel_param __setup_##unique_id \
__used __section(.init.setup) \
__attribute__((aligned((sizeof(long))))) \
= { __setup_str_##unique_id, fn, early }
#define __setup(str, fn) \
__setup_param(str, fn, fn, 0)
/* NOTE: fn is as per module_param, not __setup! Emits warning if fn
* returns non-zero. */
#define early_param(str, fn) \
__setup_param(str, fn, fn, 1)
/* Relies on boot_command_line being set */
void __init parse_early_param(void);
void __init parse_early_options(char *cmdline);
#endif /* __ASSEMBLY__ */
/**
* module_init() - driver initialization entry point
* @x: function to be run at kernel boot time or module insertion
*
* module_init() will either be called during do_initcalls() (if
* builtin) or at module insertion time (if a module). There can only
* be one per module.
*/
#define module_init(x) __initcall(x);
/**
* module_exit() - driver exit entry point
* @x: function to be run when driver is removed
*
* module_exit() will wrap the driver clean-up code
* with cleanup_module() when used with rmmod when
* the driver is a module. If the driver is statically
* compiled into the kernel, module_exit() has no effect.
* There can only be one per module.
*/
#define module_exit(x) __exitcall(x);
#else /* MODULE */
/* Don't use these in loadable modules, but some people do... */
#define early_initcall(fn) module_init(fn)
#define core_initcall(fn) module_init(fn)
#define postcore_initcall(fn) module_init(fn)
#define arch_initcall(fn) module_init(fn)
#define subsys_initcall(fn) module_init(fn)
#define fs_initcall(fn) module_init(fn)
#define device_initcall(fn) module_init(fn)
#define late_initcall(fn) module_init(fn)
#define security_initcall(fn) module_init(fn)
/* Each module must use one module_init(). */
#define module_init(initfn) \
static inline initcall_t __inittest(void) \
{ return initfn; } \
int init_module(void) __attribute__((alias(#initfn)));
/* This is only required if you want to be unloadable. */
#define module_exit(exitfn) \
static inline exitcall_t __exittest(void) \
{ return exitfn; } \
void cleanup_module(void) __attribute__((alias(#exitfn)));
#define __setup_param(str, unique_id, fn) /* nothing */
#define __setup(str, func) /* nothing */
#endif
/* Data marked not to be saved by software suspend */
#define __nosavedata __section(.data..nosave)
/* This means "can be init if no module support, otherwise module load
may call it." */
#ifdef CONFIG_MODULES
#define __init_or_module
#define __initdata_or_module
#define __initconst_or_module
#define __INIT_OR_MODULE .text
#define __INITDATA_OR_MODULE .data
#define __INITRODATA_OR_MODULE .section ".rodata","a",%progbits
#else
#define __init_or_module __init
#define __initdata_or_module __initdata
#define __initconst_or_module __initconst
#define __INIT_OR_MODULE __INIT
#define __INITDATA_OR_MODULE __INITDATA
#define __INITRODATA_OR_MODULE __INITRODATA
#endif /*CONFIG_MODULES*/
#ifdef MODULE
#define __exit_p(x) x
#else
#define __exit_p(x) NULL
#endif
#endif /* _LINUX_INIT_H */
|