Viewing file:  floppy.h (3.61 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* arch/arm/include/asm/floppy.h
*
* Copyright (C) 1996-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
*/
#ifndef __ASM_ARM_FLOPPY_H
#define __ASM_ARM_FLOPPY_H
#if 0
#include <mach/floppy.h>
#endif
#define fd_outb(val,port) \
do { \
if ((port) == (u32)FD_DOR) \
fd_setdor((val)); \
else \
outb((val),(port)); \
} while(0)
#define fd_inb(port) inb((port))
#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
0,"floppy",NULL)
#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
static inline int fd_dma_setup(void *data, unsigned int length,
unsigned int mode, unsigned long addr)
{
set_dma_mode(DMA_FLOPPY, mode);
__set_dma_addr(DMA_FLOPPY, data);
set_dma_count(DMA_FLOPPY, length);
virtual_dma_port = addr;
enable_dma(DMA_FLOPPY);
return 0;
}
#define fd_dma_setup fd_dma_setup
#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy")
#define fd_free_dma() free_dma(DMA_FLOPPY)
#define fd_disable_dma() disable_dma(DMA_FLOPPY)
/* need to clean up dma.h */
#define DMA_FLOPPYDISK DMA_FLOPPY
/* Floppy_selects is the list of DOR's to select drive fd
*
* On initialisation, the floppy list is scanned, and the drives allocated
* in the order that they are found. This is done by seeking the drive
* to a non-zero track, and then restoring it to track 0. If an error occurs,
* then there is no floppy drive present. [to be put back in again]
*/
static unsigned char floppy_selects[2][4] =
{
{ 0x10, 0x21, 0x23, 0x33 },
{ 0x10, 0x21, 0x23, 0x33 }
};
#define fd_setdor(dor) \
do { \
int new_dor = (dor); \
if (new_dor & 0xf0) \
new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \
else \
new_dor &= 0x0c; \
outb(new_dor, FD_DOR); \
} while (0)
/*
* Someday, we'll automatically detect which drives are present...
*/
static inline void fd_scandrives (void)
{
#if 0
int floppy, drive_count;
fd_disable_irq();
raw_cmd = &default_raw_cmd;
raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
raw_cmd->track = 0;
raw_cmd->rate = ?;
drive_count = 0;
for (floppy = 0; floppy < 4; floppy ++) {
current_drive = drive_count;
/*
* Turn on floppy motor
*/
if (start_motor(redo_fd_request))
continue;
/*
* Set up FDC
*/
fdc_specify();
/*
* Tell FDC to recalibrate
*/
output_byte(FD_RECALIBRATE);
LAST_OUT(UNIT(floppy));
/* wait for command to complete */
if (!successful) {
int i;
for (i = drive_count; i < 3; i--)
floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
floppy_selects[fdc][3] = 0;
floppy -= 1;
} else
drive_count++;
}
#else
floppy_selects[0][0] = 0x10;
floppy_selects[0][1] = 0x21;
floppy_selects[0][2] = 0x23;
floppy_selects[0][3] = 0x33;
#endif
}
#define FDC1 (0x3f0)
#define FLOPPY0_TYPE 4
#define FLOPPY1_TYPE 4
#define N_FDC 1
#define N_DRIVE 4
#define CROSS_64KB(a,s) (0)
/*
* This allows people to reverse the order of
* fd0 and fd1, in case their hardware is
* strangely connected (as some RiscPCs
* and A5000s seem to be).
*/
static void driveswap(int *ints, int dummy, int dummy2)
{
floppy_selects[0][0] ^= floppy_selects[0][1];
floppy_selects[0][1] ^= floppy_selects[0][0];
floppy_selects[0][0] ^= floppy_selects[0][1];
}
#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
#endif
|